Painting Kitchen Counter Tops

I did a ton of research and finally found out that I could paint those ugly dated counters to look like granite

I went to my local Home Depot and looked at granite. I also picked up some free samples to bring home and compared it to my "tile." Once I picked the sample that I liked, I took it to the craft store and matched acrylic craft paint to it. I picked a really dark brown, a dark brown, a dark tan and white.

My husband removed the sink and moved the oven. I scraped the counters to remove any excess gunk and wiped them down with 409 to remove any grease. I also used hot soap and water to wash them off.We taped off the counters and wrapped them with plastic drop cloth to protect the cabinets and floor.
We primed them with the same primer I used on the cabinets, Sherwin Williams Adhesion Primer

We let that dry thoroughly.

So the next few steps I completely forgot to take pictures. First we coated the counter with a layer of black latex and let it dry. All granite's base is black even if the overall effect is brown or white.

Next I started to faux finish the counter. I used a natural sea sponge to sponge on the color. I started with my main dark brown color. I used the really dark brown color to create some accent veins. Make sure you turn your sponge and maybe use more then one to create different patterns on your counter.

I used the dark tan to create more accents. I also used the white to create even more accents. It was around one AM at this point when I ran out of paint so the hubby ran to Walmart and picked up some more. (Thank goodness it is open 24/7). When he got back I sponged the white on and then I went back with the dark brown to soften it.  This was the end result. Sadly the camera does not show how good it really looks. You don't need to let each layer dry in between colors but you do need to let it dry completely before going onto the next step.

Next cam the scary part. We used a product called envirotex lite. This product creates a hard super shiny surface. You can buy it at Hobby Lobby and I would recommend using a 40% coupon to help make it even cheaper

The kit comes with two seperate bottles, one is a resin and the other is a hardener. You mix them in equal parts in a straight sided bucket. You really have to mix it well, the instructions say at least 2 minutes. We mixed it for one in minute in one bucket and then poured it into a second bucket and mixed for another minute. Make sure you scrape the sides and bottom well. If this product is not mixed correctly you will get spots that will not harden.

Then you get to the really scary part.

You have to pour it on the counter and after you do that, there is no turning back.

Before you start make sure you kill any and all flies in your house! My hubby and I joked about how funny it would be to wake up to find a fly stuck in our counter. Well it happened. Not funny. We had to sand that sucker off.

Gross.

My hubby poured the epoxy on the counter and used a rubber squeegee to evenly spread it over the surface. This product is a self leveler but you do need to pour enough onto your counter to allow it to level correctly.

The instructions said to use a propane torch to help bring the bubbles to the surface to pop. Well we decided to just use lighters. Not. A. Good. Idea. This began my hubbies second trip to Walmart but it was now 2 AM. The people there were wondering what in the world he was up to and why he needed craft paint and a propane torch in the middle of the night. 

Using the torch was so much easier and I would highly recommend it. You will want to buy some sponge brushes to wipe the drips of the edge and to keep re-applying it to the edges of your counters.

Look how shiny it is. LOVE IT.

I have now had the counters finished for about 4 months and I really, really like them. They have held up really well and I think they make my kitchen look updated and fantastic. I have been cleaning them with glass cleaner to help keep up the shine.